Failure to feed is a pretty rare problem which is also difficult to identify. I didn’t understand what happened first times when I experienced it. You feel that you hit something when you push forend forward trying to feed another round and when you check what happened you see a shotshell on a carrier and everything looks normal.
The original Remington 870 shotgun was designed in a way that allowed the shotshell to get jammed between the carrier and the bolt. If you tried to remove the shell, it would be a rather difficult process. If you ask anyone who used Remington 870 shotguns before the 1980s, they’ll tell you that it required a user to disassemble the shotgun. Don’t do what a lot of gun owners do and just slam your shotgun onto a hard surface because that will damage the action bars.
Looks like Remington decided to make the competitor of the Mossberg Shockwave shotgun. But Remington 870 Tac-14 don’t need adapters to accept short shotshells.
I receive a lot of questions from shotgun owners which want to add a heat shield (barrel shroud) to a shotgun. So, this review will describe available options and how to choose the best heat shield for the Remington 870.
Remington 870 shotguns are used for a variety of purposes such as hunting and home defense. The only problem novices seem to have is choosing the right ammunition to use with their shotgun. If you’re shooting birds, then you probably think of birdshot because the word “bird” is in the name. If you want to hunt deer, then you probably figure slugs are the best. But there is a third option called “buckshot” that is shotshell which can be used for hunting and home defense.
Remington is a popular shotgun brand that has been around for almost one hundred years. People love to use Remington shotguns for all kinds of shooting activities such as hunting, target shooting, and even home defense. The type of ammunition they use will typically depend on what they plan to use their shotgun for. If they are going to go out and shoot ducks, then you would use birdshot. You would use buckshot for home defense. However, if you plan on hunting bigger animals like deer, then you’ll want to use slugs with your Remington 870 shotgun. Slugs are the deadliest form of ammunition and they are quicker to kill a target than birdshot or buckshot.
Read first part here: Review of the 4 Pistol Grips for the Remington 870 Shotgun
Thanks to Synchronizor for this detailed review!
There are three controls that an 870 user manipulates with their shooting hand: the trigger, the safety switch, and the slide release. With the traditional semi-grip shotgun stocks that the 870 was designed to use, these controls are all easy to reach and manipulate. Pistol grips, whether part of a stock or stand-alone, can have a significant effect on how – and how easily – these controls are manipulated. Pistol grips rarely interfere with the gun’ s trigger for obvious reasons, but they can – and frequently do – make working the safety or slide release slower or more difficult.
The 870’ s cross-bolt safety is located right behind the trigger, and with a traditional stock that’ s no wider than the receiver and doesn’ t enclose the rear of the trigger guard, it is possible to apply pressure on the safety with the side of the finger, rather than the tip. This allows the user to disengage the safety while keeping their fingertip on or very near the trigger, so a shot can be made virtually immediately. With traditional stocks, the safety is also fairly easily reached with the thumb or middle finger for re-engagement, or for disengagement in the case of left-handed shooters using an 870 with a right-handed safety switch.
Thanks to Synchronizor for this detailed review!
I won’t get into when, where, and for what I think pistol grips should and shouldn’t be used, because it would just add several thousand more words to what is already a massive piece. I’ll simply say that while they have many downsides, and a fixed or folding stock will be a better choice for many situations, pistol-gripped shotguns do have their place. They’re very compact & maneuverable, and (usually) lighter than a full stock, which can be beneficial on a gun that’s used more as a tool than a weapon, or one that needs to be stored or deployed in very tight spaces. They’re also cool; a lot of folks (myself included) buy a pistol grips just for fun, and that’s a perfectly legitimate reason to own one.
Remington 870 Disassembly and Reassembly are very easy but there is a tool which will make this process even easier.
Hogue is a company which sells parts and accessories for firearms. Some of their most popular upgrades are made for the Remington 870 and Mossberg 500 shotguns. Some of the stocks that Hogue sells for the Remington 870 have a twelve-inch length of pull (Short Shot model). This turns the shotgun into a compact weapon and gives the shooter more mobility when they’re in constricted environments. Hogue also has standard sized stocks that are a bit longer so it really depends on your body size and the areas you’ll be using the shotgun in. For example, if you are a shooter with long hands then you may not like having a twelve-inch length of pull. But if you have shorter hands then it will be more comfortable for you.
Another shotgun from Remington 870 Photo Contest. This time we have Pistol Grip Only shotgun.
The main advantage of the PGO shotguns is compact size. It is easy to transport or carry such shotgun. PGO shotguns are very compact and fun to shoot but they have a lot of disadvantages.