Once World War II had finally ended, an engineer of Remington Arms named Merle Walker started to create a cheaper alternative to the popular Remington 30. His creation would become the Remington 721. This particular rifle model featured a cylindrical receiver that was constructed with a piece of cylindrical bar stock. A lathe could be used to turn the stock too, instead of using various milling operations to machine it. This method would ultimately lower the production costs of the weapon.

Also, the 721 contained a lot of smaller metal components that were stamped, like the bottom metal. However, the finishing of the stocks was not as impressive as it was with the older Remington models. Walker continued to develop upon the 721 bolt-action rifle a lot further, resulting in the Remington 722 and 725 models. In 1962, the Remington 700 would be born.

Walker wanted the rifles to be more accurate and the lock time to be faster. When the Remington 700 was finished, it was mass produced just like the Remington 721 was before. There were originally two versions of the Remington 700 produced by the company. There was the Remington BDL and Remington ADL, which had long-action rifles and short-action rifles available. This let users chamber cartridges that were different from each other.

By the year 1969, Remington Arms released numerous upgrades for the Model 700, such as a rear bolt shroud that was longer, better finishing for the stock, and a jeweled bolt. In 1973, Remington even produced versions of the Model 700 for left-handed shooters. This was their way of competing with another rifle for left-handed shooters, the Savage 110 model. Left-handed rifles had only been produced by Savage at the time, so it was big news when Remington started doing it too. More Model 700 versions were released shortly after, like the 700ti which had a titanium receiver, the CDL, and the 700SPS. The Model 700 had been mostly designed as a hunting rifle, but it still had the capability of being useful as a sniper rifle for police and military operations. In 1966, the U.S. Marine Corps ordered the M40 rifles for its troops. Twenty years later, the U.S. Army would begin using the M24 sniper rifle.

Best Remington 700 Stocks

Any experienced rifle or shotgun owner knows how important it is to have a stock which you are comfortable with. If you own a Remington 700, there are three stock upgrades you should consider making to increase your comfort and stabilization levels when firing the weapon. The first is the Magpul Remington 700 Hunter Stock which has machine finishing and reinforced polymer. One benefit to this stock is it gives users a length of pull that is fully adjustable and with enhanced ergonomics. Plus, this is a drop-in stock which means there is no bedding required and is compatible with all short actions of the Remington 700. And if you want to add detachable box magazines to the rifle, you can purchase a Bolt Action Magazine Well separately which gives the Remington 700 the ability to have these magazines.

Now if you’re interested in upgrading your Remington 700 with a tactical rifle stock, then consider the Bell and Carlson Varmint stock. This is a fully adjustable stock which includes an aluminum bedding block to help improve the shooter’s accuracy and to give them a customized fit platform. The stock itself is made of a various mix of composite materials to give it a solid and textured feel to it. If you are a military or police officer who uses a Remington 700, then consider this tactical stock upgrade because it will certainly add precision to your shooting ability.

Another stock option for the Remington 700 is the H-S Precision Rifle Stock. This is a drop-in stock which means it does not require any bedding. It is made of graphite and Kevlar to sustain its durability in a variety of harsh environmental conditions. The combination of fiberglass reinforcement and durability allow it to sustain a variety of tough weather conditions including rain and snow. Best of all, it is lightweight and easy to handle on your Remington 700. The H-S Precision Rifle Stock is another great alternative for those who want a tactical stock on their weapon.

Lastly, a good stock should always be easy to grip. That is why many owners of the Remington 700 like to use the Hogue Rubber Over Molded Stock because of its rubber grips. If you’re familiar with the Hogue grips, then you’ll love this stock because it’s been “overmolded” with a type of rubber that comes from the same compound. But despite it being soft and comfortable, the interior is still very durable and can survive all kinds of environmental conditions.

Magpul Remington 700 Hunter Stock

The reinforced polymer construction of this stock makes it easy to handle and use as a hunter. As you can probably guess, it is made specifically for the Remington 700 rifle which is a preferred rifle amongst hunters and competitive shooters alike. Plus, you can adjust the length of the stock to accommodate your body size and width. If you want to install optional swivel stud attachments, then you’ll find three marked drill points on the stock where you can do that. The best part is the stock has a simple “drop-in” setup which means bedding is not required. This is perfect for those who are not so experienced at upgrading their rifle by themselves.

Another big requirement amongst Remington 700 owners is being able to use detachable box magazines in the weapon. Fortunately, you can use a Magpul Bolt Action Magazine Well with these detachable box magazines so you don’t have to perform any custom inletting on the Remington 700. Of course, the magazine well is something you’ll have to purchase separately along with the magazines themselves. The neat thing about the Hunter Stock is that it allows you to attach a wide range of other accessories. You can attach ammo holsters, mount slings and so many other options.

Magpul Remington 700 Hunter Stock

Magpul Remington 700 Hunter Stock

For those who pride themselves with purchasing stocks made in America, you can rest assured that any stock you purchase from Magpul will be 100% USA made. This gives true hunters pride in their weapon because they don’t generally like to have a mixture of foreign parts and components in their Remington 700 rifles. That is understandable because most hunters feel pride for their country which gives them the freedom to hunt in the first place.

If you have any trouble attaching the Magpul Hunter Stock to your Remington 700, there are a variety of tutorial videos on the internet which will help guide you through it. But you really shouldn’t have that much trouble because of its drop-in solution for the installation. However, if you are not sure about what you’re doing, especially when it comes to drilling holes in certain places, then just have a professional gunsmith perform the installation for you. There is no sense in ruining a $260 stock over a misunderstanding of how to install it onto the receiver or how to attach an accessory onto the stock. Once you figure it out though, you’ll be in love with this stock for every outdoor sporting activity that you take part in with your Remington 700.

Recommended Product:
Magpul Remington 700 Hunter Stock

Magpul Remington 700 Hunter Stock

Get Magpul Remington 700 Hunter Stock on Brownells

Bell and Carlson Varmint/Tactical Rifle Stock for Remington 700

The Bell and Carlson Varmint/Tactical Rifle Stock is a fully adjustable and textured black stock for the Remington 700 rifle. You can use this stock with either short action or long action Remington 700 rifles. One of the most notable features of this stock is how it allows you to use heavy barrels by just dropping them into the stock. The butt assembly can be adjusted in three ways for height, cant, and length of pull. Best of all, there is an adjustable cheek piece which allows you to comfortably place your cheek and eyes so that you can aim through a scope attachment properly. The aluminum forearm rail of the stock can be used for attachments like these.

Bell and Carlson Varmint/Tactical Rifle Stock for Remington 700

Bell and Carlson Varmint/Tactical Rifle Stock for Remington 700

If you are using a short action Remington 700, the Bell and Carlson Varmint/Tactical Rifle Stock can fit a heavy barrel with a caliber between .17 and .308. If you are using a long action Remington 700, the stock can fit heavy barrels that have a wide variety of calibers like .30-06, .270, .338 Win Mag, .338 Lapua, 300 Win Mag, and so on. The stock itself weighs 5.5 pounds, so it may be a little bit heavier than what you’re used to. But with that, you’re getting a wide variety of features that make it easier for you to be precise with your aim. And if you’re worried about recoil, the 0.50-inch Pachmayr Decelerator recoil pad is designed to limit the recoil you’d normally experience from the Remington 700. With all of these options, how can you go wrong?

Before you go to purchase the Bell and Carlson Varmint/Tactical Rifle Stock, you have to decide on whether you want the short action or long action version. You won’t be able to purchase just one stock to be compatible with both versions. The good news is each version of the stock is priced the same at $517.31. On top of that, you can choose an optional finish upgrade for your stock when you order it. The standard finish is the textured black color, but you can $39.95 extra to get finishes like Desert Tan, Snow Camo, and Dark Timber. If those finishes really matter to you, then you might find it worth the extra money to get them done to your stock. Otherwise, keep the standard black stock and just enjoy the benefits it will bring to your Remington 700 rifle.

Recommended Product:
Bell and Carlson Varmint/Tactical Rifle Stock for Remington 700

Bell and Carlson Varmint/Tactical Rifle Stock for Remington 700

Get Bell and Carlson Varmint/Tactical Rifle Stock for Remington 700 on Brownells

H-S Precision Rifle Stock for Remington 700

The H-S Precision Rifle Stock for the Remington 700 is made of high quality raw material that goes through an extensive manufacturing process. To give you an idea of how extensive this process is, each stock that is manufactured gets built one at a time. Basically, an aluminum bedding block gets CNC machined in order to accommodate the exact dimensions of the action barrel it is being made for. After that, the aluminum bedding block gets put into a mold material so that it can be molded. Each side of the mold contains carbon fiber, fiberglass, and Kevlar that gets laminated onto it by hand. These three materials are what give the stock its durability and strength when trying to endure tough environmental conditions.

H-S Precision Rifle Stock for Remington 700

H-S Precision Rifle Stock for Remington 700

When you go to shop for stocks on the hsprecision.com website, it is very easy to find the right stock that is suitable for your needs. You will be presented with four categories for the stocks; tactical, competition, varmint and sporter. So, for example, if you are planning to use your Remington 700 rifle in a warlike situation, you would search for H-S Precision Tactical Stocks. These stocks specifically made to cater to snipers who have to move quickly and be completely stable and accurate with their shots. The stock contains an ambidextrous palm swell grip so that both hands can handle the stock without slippage. Plus, it has an adjustable length of pull so that the shooter can get into various positions that are necessary for the environment they’re in. As for the other stock types, they have slight differences to them in order to accommodate their intended purpose. But you can be sure that no matter which stock you choose, it will be made of high-quality material that will make it last a lifetime.

The cost of a H-S Precision Rifle Stock ranges between $415 and $685. The price is mainly determined by whether you choose a stock for a long action or short action Remington 700 rifle. Also, the color of the finishing you get for the stock is a factor as well. Some finishing won’t cost anything extra while a color like Green Tan Camo would cost $75 extra. There are optional accessories you can purchase too which include an extra swivel stud for $7, a mercury recoil reducer for $75, and an adjustable grip stand for $75. If you feel you need these extras to help you with your shooting, then go for it. Otherwise, just choose the right stock that will make it easier for you to use your Remington 700 for your intended purpose.

Recommended Product:
H-S Precision Rifle Stock for Remington 700

H-S Precision Rifle Stock for Remington 700

Get H-S Precision Rifle Stock for Remington 700 on Brownells

Hogue Rubber Over Molded Stock for Remington, 700

The Hogue Over Molded Stock for the Remington 700 contain fiberglass skeletons on the inside and a rubber coating on the outside that is permanently bound to the skeleton. This rubber coating gives the stock a non-slip feature so that you can handle the weapon in virtually any kind of environment. It doesn’t matter if it’s moist, raining, dry, or snowy because your hands will not slip regardless of these conditions. The forend and grip of the stock have a cobblestone texture which makes it much easier to grip the stock as well. So, it would be almost impossible for you to accidentally drop this stock no matter what conditions you’re face with around you.

The Hogue Over Molded Stock contains recoil pads, a straight comb, and swivel studs. There are also aluminum pillar beds in the stock as well as a free-float barrel design to increase your chances of being accurate with your Remington 700 rifle. As for the downside, you will be forced to have a 13 ¾ inch length of pull because it is not adjustable. However, this is only in reference to the short action version of the stock. You can also purchase the long action version which has a longer length of pull to it. Chances are you’ll only need to have one or the other anyway so choose the one that’s right for you and your particular version of the Remington 700.

Hogue Rubber Over Molded Stock for Remington, 700

Hogue Rubber Over Molded Stock for Remington, 700

The stock was designed specifically with accuracy in mind. Its free-floating barrel lies against the recoil lug’s sides very tightly to reduce the overall recoil of the Remington 700. But in some cases, you may notice that the barrel is not centered correctly because of some variations in the location of the recoil lug on certain rifles. If this happens to you, then you may need to take small steps in fixing this by rotating the recoil lug slightly to that the barrel is centered. The instruction manual that comes with the stock should give you information about how to do this. Either that, or you can contact Hogue and ask them for a tutorial on how to make these adjustments.

The price of a typical Hogue Over Molded Stock is only $127. The affordability of the stock might make up for the fact that it is not adjustable. It all depends on what your preferences and budget are when purchasing a stock upgrade for your Remington 700.