5 Best Remington 700 Rifle Scopes

Adjustment controls of the rifle scope

In 1962, Remington Arms started manufacturing a bolt-action rifle series called the Remington 700. This model was based on the Remington 722 and Remington 721 rifles that were first released in 1948. The Remington 700 rifles use a centerfire bolt action. Their caliber determines the capacity of the internal magazine. The ammo capacity of the magazine could be 3 rounds, 4 rounds, or 5 rounds in various versions of the model. Some allow for fast unloading, thanks to their floor plate. However, not all the rifles have floor plates in them. If you want a detachable box magazine, you’ll need to order that especially with the rifle. You can find different Remington 700 versions that include their own unique calibers, stocks, and barrels.

Read more

Best Remington 700 Stocks

Bell and Carlson Varmint/Tactical Rifle Stock for Remington 700

Once World War II had finally ended, an engineer of Remington Arms named Merle Walker started to create a cheaper alternative to the popular Remington 30. His creation would become the Remington 721. This particular rifle model featured a cylindrical receiver that was constructed with a piece of cylindrical bar stock. A lathe could be used to turn the stock too, instead of using various milling operations to machine it. This method would ultimately lower the production costs of the weapon.

Also, the 721 contained a lot of smaller metal components that were stamped, like the bottom metal. However, the finishing of the stocks was not as impressive as it was with the older Remington models. Walker continued to develop upon the 721 bolt-action rifle a lot further, resulting in the Remington 722 and 725 models. In 1962, the Remington 700 would be born.

Walker wanted the rifles to be more accurate and the lock time to be faster. When the Remington 700 was finished, it was mass produced just like the Remington 721 was before. There were originally two versions of the Remington 700 produced by the company. There was the Remington BDL and Remington ADL, which had long-action rifles and short-action rifles available. This let users chamber cartridges that were different from each other.

By the year 1969, Remington Arms released numerous upgrades for the Model 700, such as a rear bolt shroud that was longer, better finishing for the stock, and a jeweled bolt. In 1973, Remington even produced versions of the Model 700 for left-handed shooters. This was their way of competing with another rifle for left-handed shooters, the Savage 110 model. Left-handed rifles had only been produced by Savage at the time, so it was big news when Remington started doing it too. More Model 700 versions were released shortly after, like the 700ti which had a titanium receiver, the CDL, and the 700SPS. The Model 700 had been mostly designed as a hunting rifle, but it still had the capability of being useful as a sniper rifle for police and military operations. In 1966, the U.S. Marine Corps ordered the M40 rifles for its troops. Twenty years later, the U.S. Army would begin using the M24 sniper rifle.

Read more

Best Remington 700 Upgrades: Stock, Bipod, Scope Base, Bolt Lift, Barrel

Harris Bipod for Remington 700 Rifle

The Model 700 has a bolt action which is manually operated and contains 2 forward lugs (dual-opposed). It has a lower bolt face which completely encloses the cartridge base. The extractor sits inside the bolt face as a C-clip. The ejector of the bolt face acts as a plunger which needs a coil spring to activate it. The bolt is constructed with 3 brazed pieces; the bolt handle, head, and body. Circular cross-section steel is used to mill the receiver.

There are many variations of the Remington 700. The bolt body has 2 lugs that are symmetrical and a diameter that is 17.65 millimeters. The lock time of the long action is approximately 3.2 milliseconds.

Different magazine configurations can be added to the Remington 700. You can add a blind magazine (which is a magazine without a floorplate), a detachable box magazine, or a standard magazine that does have a floorplate. Some versions are made for consumer use while others are made for police and military use. In some versions, there will be accessories like bipods and slings included with them.

Standard Model 700 Variants

One Remington variant of the Model 700 is their Mountain LSS model. This contains a barrel made from stainless steel and a stock that is laminated. Another variant is the Remington 700 SPS Varmint which contains a heavy barrel and laminated stock. This model is made specifically for hunting varmint. For a while, the most affordable 700 model was the 700 ADL, but this would eventually get replaced by the Model 700 Special Purpose Synthetic (SPS).

Since 1996, the Remington 700 ML rifle has been produced. This is a rifle which gets loaded at the muzzle. In 2000, the Remington 700 EtronX had the electronic primer ignition system built into it. However, this model and the EtronX primers only lasted on the commercial market for 3 years before their production was stopped. The model was simply not a success.

Read more

Best Remington 700 Bipods

Accu-Shot Atlas Bipod Quick Detach Bipod for Remington 700

There are plenty of stocks and adjustments you can make to a Remington 700, but those will only take you so far when you want precision and stability in your shots. That is why bipods are a popular attachment, especially when you’re lying on the ground or can’t get into a position where you can stand and shoot. A bipod goes on the bottom of the Remington 700 and features two legs which stand it up on the surface that you’re on. Let’s take a look at a few recommended bipods for the Remington 700.

The Accu-Shot Atlas Bipod is an aluminum bipod that is lightweight while still maintaining its durability with its stainless-steel components. The legs are independently adjustable to five different leg positions. The legs can also be extended from a length of five inches to a length of nine inches. The front-to-back adjustment can be done up to 180° while having the ability to pan to the left or right at 30° in each direction. The cant adjustment is also 30° which makes it perfect for shooting on terrains that are uneven and rough.

Read more

4 Best Remington 700 Triggers: Jewell HVR, Timney Calvin Elite, Shilen Trigger

Timney Calvin Elite Trigger

Owners of the Remington 700 don’t usually think too much about the trigger quality of their weapon. They just figure you pull back on the trigger and the rifle fires with nothing more to it than that. The truth is there are good triggers and bad triggers which can make the difference in how difficult it is to shoot the weapon. The Remington 700 has three trigger options which you should consider for your weapon. They are the Jewell HVR Trigger, Timney Calvin Elite Trigger, and the Shilen Trigger. Although a more expensive replacement trigger upgrade won’t enhance your skills as a shooter, it will give you the ability to hit your target without any limitations from the weapon itself.

Read more

5 Best Remington 700 Chassis: Modular Driven Technologies, JP, Accuracy International, Masterpiece Arms, Kinetic Research Group

Kinetic Research Group Remington 700 X-Ray Chassis

Remington 700 history

In 1962, Remington Arms began manufacturing their bolt-action rifle series known as the Remington 700. Each rifle of this series uses a similar centerfire bolt action function. Depending on the caliber of the rifle, its internal magazine will usually have a capacity of either 3 rounds, 4 rounds, or 5 rounds. Some versions even have a floor plate (BDL version) which allows you to unload the ammunition from the bottom by a hinged door. If there is no floor plate installed (BDL version), then it is considered a “blind” unloading. You can turn an ADL into a BDL with a floor plate kit and a stock.

When you place your order for the rifle, you can have a detachable box magazine included with it. There are a variety of different assembly options available when you purchase the Remington 700 model. These differences pertain to its stock, caliber configuration, and barrel type. The rifle model is an expansion of the Remington 722 and Remington 721 models. These were first sold to the public in 1948.

This is one of the best bolt-action rifles ever. It is made in the United States with great pride. The Remington 700 models have been the most popular bolt-action rifles for more than 50 years. No other bolt-action rifle has generated more sales than the 700 series.

The receiver of the Model 700 has 3 steel rings which are quite known for their strength. It also includes a hammer forged barrel. This combination of components makes the Model 700 a superior bolt-action rifle amongst all the rest. This is the reason why elite snipers in the military choose to use the Model 700. It provides the kind of precision needed in a tactical operation. But even if you’re just hunting game in the woods, you can still take advantage of the accuracy that this weapon provides.

Read more

Sign up to the Newsletter and get "10 Tips to Building a Tactical Remington 870" ebook: