If you own a Remington 870, Remington 11-87, or Remington 1100, and you want better accuracy when shooting slugs, then you will want to upgrade your weapon’s factory sear spring with the lighter spring. You can read about Remington factory sear springs available in previous review: Remington 870 Sear Springs (Light Pull, Standard, Police (Heavy))
If you have a loose latch in your Remington 870 pump-action shotgun or Remington 1100 semi-automatic shotgun, then you probably know how difficult it can be to restake the latch with just a staker and hammer. The Remington 870/1100 Shell Latch Staking Tool will make your restaking job so much easier. Not only will it help you locate the shell latch that is loose, but it will allow you to restake the latch without the need of a hammer. If you like staking latches with ease and convenience, then you should invest in this tool right away.
Remington has made gas-operated shotguns since the 1950s. Their very first one manufactured was the Model 58 semi-automatic shotgun. This shotgun line enjoyed a fair amount of success between 1956 and 1963. But then, they built a better gas-operated shotgun which reduced recoil a lot more. This model was called the Remington Model 1100. It was first introduced in 1963 and has been manufactured ever since. The three most common gauges manufactured for this shotgun are the 12-gauge, 28-gauge, .410 bore and 20-gauge.
Remington 870 Disassembly and Reassembly are very easy but there is a tool which will make this process even easier.
This is updated review of the Timney Remington 870/1100/11-87 Trigger Fix
One of the simplest ways to improve your shotgun’s performance is to change a standard MIM (Metal injection molded) extractor with non-MIM (solid steel) extractor. Steel extractors are used on the Remington 870 Police shotguns because they are more durable and allow heavy use of a shotgun.
An extractor is a part found in most firearms. It removes the spent cases from the ammunition that gets fired after you pull the trigger. With Remington 870/1100 extractors, you can use a non-MIM or a MIM extractor for the shotgun. MIM stands for metal injection molding. Newer Remington 870/1100 shotguns use MIM extractor. But the good news is that you can replace the MIM extractor with a Non-MIM extractor.
This is review of the Remington 1100/11-87 Combat Charging Handles from S&J Hardware and Daves Metal Works.
I don’t have a Remington 1100/11-87. That is why I sent charging handle from S&J Hardware to Konstantin from Russia. He have ordered charging handle by Daves Metal Works for his Remington 11-87 and it was a good opportunity to compare two charging handles.