Lets have some pictures of your builds.

Tactical, combat, military, law enforcement and home defense use of a Remington 870 shotgun.
sodapopsixtysix
Shotgunner
Posts: 24
Joined: Sat May 31, 2014 5:40 am

Re: Lets have some pictures of your builds.

Post by sodapopsixtysix » Fri Apr 07, 2017 5:40 pm

hector.jacob wrote:
Wed Apr 05, 2017 7:41 pm
my remington 870 12ga 3" magnum
duracoat with durablue
hiviz shotgun sight
wilson combat 2 shot vertical magazine extension kit (follower + magazine spring)
tanks HD magazine/barrel clamp
wilson combat jumbo head safety
870 non mim extractor
1100 carrier dog follower spring ( carrier latch)
limbsaver airtech recoil pad

Image
That's a good looking set-up!

User avatar
Synchronizor
Elite Shotgunner
Posts: 3022
Joined: Fri Dec 28, 2012 8:04 am
Location: The Inland Northwest
Contact:

Re: Lets have some pictures of your builds.

Post by Synchronizor » Sat Apr 08, 2017 5:02 am

sodapopsixtysix wrote:
Fri Apr 07, 2017 5:39 pm
I have another gun with the Scattergun Technologies +2 and the factory follower would hang up. I changed that to the Wilson follower and it's been fine ever since. That gun also has the Scattergun spring. I suspect that the factory follower can deform or tilt under pressure and hang up in the gap between the tube and 1 piece extension.
The issue with that combo is that the Wilson Combat springs are "beehive" springs that are narrow on the ends, and wide in the middle. The wider central coils are too wide to stack up nicely inside cup-style followers like the factory followers, they instead hang up on the edge of the cup, adding drag and encouraging the follower to tilt.

hector.jacob
Shotgunner
Posts: 28
Joined: Mon Dec 30, 2013 5:15 pm

Re: Lets have some pictures of your builds.

Post by hector.jacob » Mon Apr 10, 2017 1:43 pm

thanks sodapopsixtysix

Juanes29
Newbie
Posts: 1
Joined: Sun May 14, 2017 1:04 am

Re: Lets have some pictures of your builds.

Post by Juanes29 » Sun May 14, 2017 1:43 am

Bronx629 wrote:
Sun Jan 13, 2013 11:07 am
heres a few more for you guys..enjoy
Hey Bronx629 !
I'm amazed by that 870, is there any way I can contact you to ask you some questions about it ??
I'm really new in this and I would love to have some guidance.

My Email is 0581289@gmail.com if you have the chance I would appreciate some help !

Thanks !

vyadha
New Shotgunner
Posts: 10
Joined: Thu Oct 27, 2016 6:53 pm

Re: Lets have some pictures of your builds.

Post by vyadha » Mon Jun 12, 2017 8:02 pm

Super simple. I bought with a PG and got rid of it after firing 50 rounds. Really love shooting this thing.

Image

wallynwylie
Newbie
Posts: 2
Joined: Thu Jun 15, 2017 3:25 am

Re: Lets have some pictures of your builds.

Post by wallynwylie » Mon Jun 19, 2017 4:00 am

As purchased:

Image

Modified:

Image

HAHAHA, just kidding. Here's the real deal:

Image

once0217
Newbie
Posts: 3
Joined: Wed Jun 21, 2017 4:47 am

Re: Lets have some pictures of your builds.

Post by once0217 » Wed Jun 21, 2017 4:52 am

Image
Here's a messy bed shot of my Hawk 981R and my Tac 14. Sorry I was too excited to get a better pic.

shawnm
New Shotgunner
Posts: 9
Joined: Sun May 14, 2017 2:52 pm

Re: Lets have some pictures of your builds.

Post by shawnm » Tue Jul 18, 2017 5:14 pm

Image
Top is 20" barrel 590A1 with Magpul front and rear, MOD-C clamp up front Streamlight PolyTac, Magpul MS-1 sling, and Esstac shell card on sticky-tape velcro backing.

Bottom is old 870 Express with Mossberg 18.5" cylinder bore replacement barrel, Scattergun Tech +2 magazine extension, Magpul furniture and MS-1 sling, Streamlight TLR-1 HL, and same Esstac on velcro.

I tried the Wilson Combat big safety button on the 870 but took it off as I found it sticky and unreliable so I swapped back to stock.

shawnm
New Shotgunner
Posts: 9
Joined: Sun May 14, 2017 2:52 pm

Re: Lets have some pictures of your builds.

Post by shawnm » Wed Jul 19, 2017 9:20 pm

Image

Amatuer photoshop to marginally improve worse than amateur photography.

User avatar
Jbur
Experienced Shotgunner
Posts: 63
Joined: Tue Nov 14, 2017 10:33 pm

Re: Lets have some pictures of your builds.

Post by Jbur » Sun Dec 31, 2017 10:29 pm

Finally finished my build.

Magpul SGA stock
Magpul M-lok forend
Magpul sling mount
Magpul ms3 sling
Elzetta flashlight mount
Streamlight polytac light
Mesa Tactical 6 shot carrier
Wilson combat follower and spring
Volquartsen extractor
Stiffer carrier spring
Vang comp safety

Tactical model already came with 2 shot extension and ghost ring sights.ImageImageImageImageImageImageImageImage

Sent from my SM-G950U using Tapatalk

Magpul SGA stock, M-lok forend, ms3 sling, Wilson combat follower/spring, vangcomp safety, volquartsen extractor, heavy carrier spring, Nordic barrel clamp.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest