installed new fore end , SS follower, extractor & spring.
removed the tactical one due to poor fit.
the synthetic sport is a vast improvement .
feels & functions 100% better.
sawed off the vent ribbed barrel and will have it rethreaded for chokes ,
going to replace stock , any suggestions ?
also need a good lightweight light to attach to barrel or mag extension, any suggestions ?
my first shot gun , enjoying upgrading it
my first shot gun , enjoying upgrading it
- Attachments
-
- 12 gauge.JPG (321.14 KiB) Viewed 6681 times
Last edited by oriyen on Mon Jan 20, 2014 3:34 am, edited 4 times in total.
Re: my first shott gun , enjoying upgradingb it
SS FOLLOWER, NON MIM + NEW SPRING
- Attachments
-
- photospring & extractor.JPG (115.81 KiB) Viewed 6680 times
-
- stainless steel follower.JPG (107.46 KiB) Viewed 6680 times
Re: my first shot gun , enjoying upgrading it
Nice barrel!
My post: 5 Best Aftermarket Stocks for Remington 870 will be interesting for you.
This post will be useful too: 3 Ways to Attach a Flashlight to Your Remington 870 Shotgun
I like Hogue overmolded stocks, also Magpul stock is now one of the most popular choices.going to replace stock , any suggestions ?
also need a good lightweight light to attach to barrel or mag extension, any suggestions ?
My post: 5 Best Aftermarket Stocks for Remington 870 will be interesting for you.
This post will be useful too: 3 Ways to Attach a Flashlight to Your Remington 870 Shotgun
http://www.Rem870.com - Blog about the Remington 870 Shotgun
Re: my first shot gun , enjoying upgrading it
thanks Vitaly for the suggestions I am leaning towards the Choate stock at this point. it seems to be a cross between a traditional & a tactical it also has an adjustable LOP .
if I don't like it I will try a magpul & or an over mold .
I found a good local smith that is going to rethread my barrel for sixty dollars , I will probably have him I install a bead sight .
I considered a big dot night sight , does anyone at this forum have any experience with them. if so do you like it ?
if I don't like it I will try a magpul & or an over mold .
I found a good local smith that is going to rethread my barrel for sixty dollars , I will probably have him I install a bead sight .
I considered a big dot night sight , does anyone at this forum have any experience with them. if so do you like it ?
Last edited by oriyen on Sun Jan 19, 2014 11:57 pm, edited 1 time in total.
Re: my first shot gun , enjoying upgrading it
I am fairly new with the whole 870 scene also. I just finished my build recently. I got the magpul sga. i went with the high cheek risers. the lop is adjustabl by adding spacers. It is the most awesome upgrade I have gotten so far. It is so unique. I was going to go with a pistol grip on my stock,but I just didnt know if I could get use to it. Every time I pick up a gun I grab it thumb over out of habit. Muscle memory. back from the first bb gun I handled. The sga gives the feel of both worlds. It also gives you many sling options.
Re: my first shot gun , enjoying upgrading it
photo on top is after upgrades
the bottom photo is before I swapped fore ends & stocks .
so far I like the choate stock .
the bottom photo is before I swapped fore ends & stocks .
so far I like the choate stock .
- Attachments
-
- photo.JPG (67.22 KiB) Viewed 6236 times
-
- 8702014.jpg (93.41 KiB) Viewed 6449 times
Last edited by oriyen on Sat Mar 22, 2014 5:27 pm, edited 1 time in total.
Re: my first shot gun , enjoying upgrading it
speed safety photo
- Attachments
-
- Attachment-13.jpeg (34.89 KiB) Viewed 6449 times
Re: my first shot gun , enjoying upgrading it
speed safety photo
- Attachments
-
- Attachment-12.jpeg (29.51 KiB) Viewed 6449 times
Re: my first shot gun , enjoying upgrading it
fore end modification picture. I just feel better being able to have an unobstructed view of the bottom port.
- Attachments
-
- photo 2.JPG (37.56 KiB) Viewed 6449 times
Re: my first shot gun , enjoying upgrading it
fore end mod.
- Attachments
-
- photo 4.JPG (36.23 KiB) Viewed 6448 times