Lets have some pictures of your builds.

Tactical, combat, military, law enforcement and home defense use of a Remington 870 shotgun.
Janus
Newbie
Posts: 1
Joined: Thu Mar 24, 2016 8:54 pm

Re: Lets have some pictures of your builds.

Post by Janus » Thu Mar 24, 2016 9:02 pm

Banshee,

Any chance of you loading up the photos of that awesome shorty again - and maybe a few words about how you build it?

Thanks

Janus

User avatar
Banshee
Guru Shotgunner
Posts: 400
Joined: Thu Nov 29, 2012 9:35 pm
Location: Lost State of Franklin

Re: Lets have some pictures of your builds.

Post by Banshee » Fri Mar 25, 2016 1:08 pm

Janus wrote:Banshee,

Any chance of you loading up the photos of that awesome shorty again - and maybe a few words about how you build it?

Thanks

Janus

Sure no problem. I haven't made any new pictures, so these are all old.

The shotgun started out as a Wingmaster Police trade in with a Mossberg replacement barrel that I picked up for $149.00. So, no nice 870 was harmed in this transformation.

There was a LOT of time spent measuring and planning on what needed to be done to make everything work out to reach my goal of an OAL of less than 18 inches. I chose 18 inches because that is the legal limit of a non NFA shotgun barrel and I wanted the whole gun to be shorter than that limit. I surpassed my goal by 1/2 inch.


I mounted the receiver in a lathe using a four jaw chuck and a steady rest. Cut the mag tube down and re-threaded it with the same square thread Remington used. The barrel was cut down to 7.00 inches and the barrel support ring was removed with a torch, reshaped so it would fit the barrel in the new location and silver soldered in place. The fore end tube had to be shortened and re-threaded. I made several different sling mounts and finely decided to use this one here.


Image

I machined the 12 sided nut to hold the barrel on.
Image


I installed an Ithaca M&P brass bead
Image


I cut a beautiful TB Trap fore-end down, worked and reworked it to fit the tube.
Image

Image


here it is with a standard 870 with a 13 inch barrel
Image
The devil danced as he went down, in the hail of arrows comin' Out on the wild Montana ground, Custer died a-runnin'.

User avatar
Synchronizor
Elite Shotgunner
Posts: 3022
Joined: Fri Dec 28, 2012 8:04 am
Location: The Inland Northwest
Contact:

Re: Lets have some pictures of your builds.

Post by Synchronizor » Sat Mar 26, 2016 6:04 am

Neat to see details, Banshee. I really like how that fore-end looks; seems much more practical than the folding vertical grip you see on a lot of shorty pumps.

Sweaty
Newbie
Posts: 3
Joined: Fri Apr 08, 2016 12:00 pm

Re: Lets have some pictures of your builds.Slam Fire

Post by Sweaty » Mon Apr 11, 2016 10:03 am

I don't know if this is off topic but the slam fire trigger group makes a lot of sense to me . So keep me posted on any progress on some safe modifications [still pass the drop test] or indeed were to buy a ready to go drop in unit. I am definitely interested.

Red Beans 504
New Shotgunner
Posts: 5
Joined: Thu Mar 31, 2016 5:49 pm

Re: Lets have some pictures of your builds.

Post by Red Beans 504 » Sat Jul 30, 2016 9:22 pm

Rem 870 Police Magnum

Rem 18 inch bead sight barrel, improved
Rem 2 shot extension
Magpul SGA stock
Rem supercell butt pad
Surefire DSF Forend/Light
Mesa Tac 6 shot side saddle
Attachments
image.jpeg
image.jpeg (1.61 MiB) Viewed 13066 times
image.jpeg
image.jpeg (1.02 MiB) Viewed 13066 times
image.jpeg
image.jpeg (1.33 MiB) Viewed 13066 times

Red Beans 504
New Shotgunner
Posts: 5
Joined: Thu Mar 31, 2016 5:49 pm

Re: Lets have some pictures of your builds.

Post by Red Beans 504 » Sat Jul 30, 2016 9:23 pm

Details
Attachments
image.jpeg
image.jpeg (1.24 MiB) Viewed 13066 times
image.jpeg
image.jpeg (1.11 MiB) Viewed 13066 times
image.jpeg
image.jpeg (1010.41 KiB) Viewed 13066 times

steelfortress
Newbie
Posts: 1
Joined: Tue Aug 02, 2016 2:17 am

Re: Lets have some pictures of your builds.

Post by steelfortress » Tue Aug 02, 2016 2:20 am

Rem 870
Mesa Tactical Hightube Hydraulic Recoil Stock
Sightmark Holographic Reflex Sight

Image
Image

terrakot
Newbie
Posts: 1
Joined: Wed Jun 15, 2016 1:14 pm

Re: Lets have some pictures of your builds.

Post by terrakot » Wed Aug 10, 2016 11:53 am

Here is my Rem 870 Deer gun (1994) in Magpul furniture (buttstock, forend and swivel). Magazine extension by Nordic components. Also installed non-MIM extractor and Nordic comp follower
Attachments
IMG_595200.jpg
IMG_595200.jpg (439.05 KiB) Viewed 12979 times
15836756.jpg
15836756.jpg (262.31 KiB) Viewed 12979 times

tuco870
Newbie
Posts: 1
Joined: Thu Jun 30, 2016 2:27 am

Re: Lets have some pictures of your builds.

Post by tuco870 » Sun Aug 21, 2016 4:25 am

My humble submission:

Remington 870 Wingmaster (1980's Police trade-in given to me as a gift years ago). Wasn't in the best shape - I removed the beat up wood furniture, added the +2 extension and sent it off to Wilson Combat for their Remington Steal package. It turned out better than I expected... they added the ghost ring sights, factory synthetic furniture, new magazine spring and high vis follower, oversized safety, and refinished the entire gun with their armor-tuff finish.

Couldn't be happier with the result!

Image
Image
Image
Image
Image

Bill_1202
New Shotgunner
Posts: 12
Joined: Wed Aug 24, 2016 5:21 pm

Re: Lets have some pictures of your builds.

Post by Bill_1202 » Wed Aug 24, 2016 7:37 pm

MStarmer wrote:Started out life as the most basic of 870 Police Magnums (Model 24901).

18.5" Barrel, Parkerized, Modified Choke, Adjustable Night Sights (Meprolight)
Magpul SGA Stock and single point sling adapter
Remington Supercell Recoil Pad
Vang Comp +2 extension, spring and follower
Surefire 318LM Forend
S&J Velcro Side Saddle

Image
Image
Image
I am planning on getting the Magpul stock you have. I do have a question though. Does that Remington recoil pad attach to the Magpul and bolt right on? Did you have to do anything different to the Magpul stock to get them to work together?

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests