870 express trigger question
-
Dantheman2475
- Newbie
- Posts: 2
- Joined: Fri Mar 15, 2024 11:59 am
870 express trigger question
Hey guys I’m not sure what this part is pictured below but there is a chip missing from it. Looks like pot metal. Should I be concerned about this. And also is this part or the removable trigger pack assembly
- Attachments
-
- IMG_1484.jpeg (197 KiB) Viewed 714 times
Re: 870 express trigger question
It's not pot metal, it's cast aluminum I think. I believe most expresses have plastic housings. 
Thats the coating that is flaked off. I wouldn't worry about it too much but I would keep an eye on it to see if it continues. Everything in the trigger group is replaceable if you want to. I would suggest you watch a couple of videos on taking it apart.
Here is a link to an exploded view of the 870 Trigger Group:
https://www.mcarbo.com/remington-870-trigger-group-exploded-view.aspx
Thats the coating that is flaked off. I wouldn't worry about it too much but I would keep an eye on it to see if it continues. Everything in the trigger group is replaceable if you want to. I would suggest you watch a couple of videos on taking it apart.Here is a link to an exploded view of the 870 Trigger Group:
https://www.mcarbo.com/remington-870-trigger-group-exploded-view.aspx