870 with Ribbed top receiver?

General discussion about Remington 870 shotgun.
MARKO65
New Shotgunner
Posts: 9
Joined: Tue Jan 05, 2016 10:18 pm

870 with Ribbed top receiver?

Post by MARKO65 » Tue Jun 16, 2020 4:46 pm

I have an older 870 wingmaster serial # 669865M. Not sure date of mfg...it has a ribbed top receiver.A few years ago I took off the long ribbed hunting barrel, now I just ordered a 18.5 12 guage barrel and I was wondering why I don't see any other wingmasters I looked for online with a rib ontop of the receiver? I understand why its there for as better site picture when I had on the old 30 inch barrel. But I cannot find anything online about it?

Best Marko

User avatar
Scorpion8
Elite Shotgunner
Posts: 1321
Joined: Wed Nov 29, 2017 7:17 pm
Location: SE-AK

Re: 870 with Ribbed top receiver?

Post by Scorpion8 » Wed Jun 17, 2020 3:01 pm

Its possible that was set up as a competition clays gun, and the extended rib along the receiver helps the sighting plane. We'd love to see some pics. Do you still have the ventilated rib barrel?
Imperious Moderatus
Retired USN
NRA Life ; NAHC Life
Pain heals, chicks dig scars.....glory -- lasts forever!

MARKO65
New Shotgunner
Posts: 9
Joined: Tue Jan 05, 2016 10:18 pm

Re: 870 with Ribbed top receiver?

Post by MARKO65 » Wed Jun 17, 2020 3:22 pm

Hi thanks for the reply..... no I got ride of the barrel its from the 60's and the rib was coming off. Here are a few pictures....have not seen another like it online and except fo you no one seems to answer any questions here? thanks for your reply.

Marko

Image

Image
IMG_0154.jpeg
IMG_0154.jpeg (611.28 KiB) Viewed 4788 times
Image
IMG_0154.jpeg
IMG_0154.jpeg (611.28 KiB) Viewed 4788 times
Attachments
IMG_0156.jpeg
IMG_0156.jpeg (625.95 KiB) Viewed 4788 times
IMG_0155.jpeg
IMG_0155.jpeg (573.88 KiB) Viewed 4788 times

User avatar
Scorpion8
Elite Shotgunner
Posts: 1321
Joined: Wed Nov 29, 2017 7:17 pm
Location: SE-AK

Re: 870 with Ribbed top receiver?

Post by Scorpion8 » Fri Jun 19, 2020 6:04 pm

MARKO65 wrote:
Wed Jun 17, 2020 3:22 pm
... and except fo you no one seems to answer any questions here? thanks for your reply.
Sure. That looked like an aftermarket-custom addition for a clays gun, the ribbing designed to deflect glare along the sighting plane and would have extended straight to the barrel's ventilated rib.

This is a slower paced place than lots of forums because of how "one-gun-specific" it is. Plus, most folks are into 870's for HD purposes, not the clay sports. There are several oft-participating members, but also many folks who come with one question, get it, and leave. I'm a moderator, so I'm here all the time (on and off). I try to make sure that someone replies to every question, even if I don't know the exact answer.

Did you replace the action pins with those after-market versions?
Imperious Moderatus
Retired USN
NRA Life ; NAHC Life
Pain heals, chicks dig scars.....glory -- lasts forever!

Romulus
Valued Shotgunner
Posts: 130
Joined: Sat Jun 06, 2020 8:53 am

Re: 870 with Ribbed top receiver?

Post by Romulus » Sat Jun 20, 2020 12:58 am

That's actually a very interesting piece, possibly rare or unique. I'm sure there's a top end smith out there that could install a matching rib on a barrel. Looks like a keeper.
Rom

Romulus
Valued Shotgunner
Posts: 130
Joined: Sat Jun 06, 2020 8:53 am

Re: 870 with Ribbed top receiver?

Post by Romulus » Sat Jun 20, 2020 1:08 am

There's a board where someone I'm sure can help you find out

thefiringline.com

Go to the Sunkworks section and check
The Harley Nolden Memorial Institute for Firearms Research subsection.

I'm certain you'll get your answer there

Rom

MARKO65
New Shotgunner
Posts: 9
Joined: Tue Jan 05, 2016 10:18 pm

Re: 870 with Ribbed top receiver?

Post by MARKO65 » Wed Jul 01, 2020 4:20 pm

Thank you for the replies I appreciate it...I don't shoot cloys with it anymore . I just put on a 18.5 inch barrel . Those pins were on it when I purchased it some years ago, also it had a 30 inch barrel that was ribbed like the top receiver. Sold that a few years ago the rib was getting loose and veery old. I contacted Remington about the receiver via email a month ago but no reply. It def looks factory and not aftermarket but who knows when I search for it online I get no hits on it.....it does help with shooting straight though.

Marko

MARKO65
New Shotgunner
Posts: 9
Joined: Tue Jan 05, 2016 10:18 pm

Re: 870 with Ribbed top receiver?

Post by MARKO65 » Wed Jul 01, 2020 4:22 pm

Romulus.... sorry I don't see s SUNKWORKS section anywhere on here.

Romulus
Valued Shotgunner
Posts: 130
Joined: Sat Jun 06, 2020 8:53 am

Re: 870 with Ribbed top receiver?

Post by Romulus » Wed Jul 01, 2020 5:36 pm

Screenshot_20200701-202725~2.png
Screenshot_20200701-202725~2.png (307.39 KiB) Viewed 4725 times

MARKO65
New Shotgunner
Posts: 9
Joined: Tue Jan 05, 2016 10:18 pm

Re: 870 with Ribbed top receiver?

Post by MARKO65 » Wed Jul 01, 2020 7:53 pm

Do you have a direct link there? The link you sent with the firing lines does not take me there and when I do a search for skunkworks on this site the only thing that comes is this thread?

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests