New guy from Louisiana

General discussion about Remington 870 shotgun.
Nomaster77
New Shotgunner
Posts: 9
Joined: Wed Dec 04, 2019 5:18 am

New guy from Louisiana

Post by Nomaster77 » Wed Dec 04, 2019 5:32 am

Hey fellas I'm looking to refurbish my approximately 90 model 870 ex press magnum. I have currently purchased a 23* replacement for the 28"and a +3tube extension. Eventually I want to cerakote it in burnt bronze. I also have a six shell side saddle with a picatinny mount along wit a magpul sga stock and mifor end. It appears to be old enough to have missed out on the magazine dimples and mim extractor. I also ordered a Wilson combat jumbo safety anything else I need to look for?

Nomaster77
New Shotgunner
Posts: 9
Joined: Wed Dec 04, 2019 5:18 am

Re: New guy from Louisiana

Post by Nomaster77 » Wed Dec 04, 2019 7:15 am

Quick question does anyone know of a wayto permanently blacken the bolt mines kinda half black and half shiny I'm thinking the black will look better with the burnt bronze cerakote

Germansheperd
Senior Shotgunner
Posts: 245
Joined: Sat Nov 24, 2018 2:42 pm

Re: New guy from Louisiana

Post by Germansheperd » Wed Dec 04, 2019 12:42 pm

Get an 1100 carrier spring, aluminum follower, Volquartsen extractor, heavy/police sear spring, and a new firing pin spring.

You can always get a new black or chrome bolt if/when you cerekote it.

Nomaster77
New Shotgunner
Posts: 9
Joined: Wed Dec 04, 2019 5:18 am

Re: New guy from Louisiana

Post by Nomaster77 » Thu Dec 05, 2019 1:53 am

The Carlson magazine extendion comes with a new follower but I'm not sure of the material so I'll check it out before I install it. I was really hoping to blacken the original bolt to the gun since it was new and black at one time and it obviously didn't hold up too well. As for the rest of the spring upgrades I'll keep them in mind

User avatar
Scorpion8
Elite Shotgunner
Posts: 1321
Joined: Wed Nov 29, 2017 7:17 pm
Location: SE-AK

Re: New guy from Louisiana

Post by Scorpion8 » Thu Dec 05, 2019 4:35 pm

Nomaster77 wrote:
Wed Dec 04, 2019 7:15 am
Quick question does anyone know of a wayto permanently blacken the bolt?
Not sure of a "permanent" method since the metal is already hardened besides bluing. Anything on the outside as a coating will wear off with use at any contact points. You could try to cold blue the bolt body or see if you can get one of the Express style dark nitride-finish bolts.
Imperious Moderatus
Retired USN
NRA Life ; NAHC Life
Pain heals, chicks dig scars.....glory -- lasts forever!

Nomaster77
New Shotgunner
Posts: 9
Joined: Wed Dec 04, 2019 5:18 am

Re: New guy from Louisiana

Post by Nomaster77 » Thu Dec 05, 2019 9:50 pm

And wouldn't that be what came in this express shotgun? Not trying to be a smart alleckjust wondering if the factory found a better way since 1990

User avatar
Scorpion8
Elite Shotgunner
Posts: 1321
Joined: Wed Nov 29, 2017 7:17 pm
Location: SE-AK

Re: New guy from Louisiana

Post by Scorpion8 » Fri Dec 06, 2019 2:59 am

Nomaster77 wrote:
Thu Dec 05, 2019 9:50 pm
Not trying to be a smart alleckjust wondering if the factory found a better way since 1990
No problem, but you've probably answered your own question. Post up a pic of the wear spots. If they're where the bolt rubs against other parts when cycling the action, then no surface coating will be wear-proof. You could have it Cerakoted black, and then never cycle the action. Or carry a Sharpie in your gun kit and do touch up as needed.
Imperious Moderatus
Retired USN
NRA Life ; NAHC Life
Pain heals, chicks dig scars.....glory -- lasts forever!

Nomaster77
New Shotgunner
Posts: 9
Joined: Wed Dec 04, 2019 5:18 am

Re: New guy from Louisiana

Post by Nomaster77 » Fri Dec 06, 2019 8:21 am

OK so I want the impossible why am I not surprised

User avatar
Scorpion8
Elite Shotgunner
Posts: 1321
Joined: Wed Nov 29, 2017 7:17 pm
Location: SE-AK

Re: New guy from Louisiana

Post by Scorpion8 » Fri Dec 06, 2019 3:50 pm

Nomaster77 wrote:
Fri Dec 06, 2019 8:21 am
OK so I want the impossible why am I not surprised
In all honesty the weapon is a tool, not a van Gogh work of art that isn't to be touched or scratched. But it's your gun, so if that's what you want, get the bolt cerakoted. They do look good all-black. While it lasts.
Imperious Moderatus
Retired USN
NRA Life ; NAHC Life
Pain heals, chicks dig scars.....glory -- lasts forever!

Nomaster77
New Shotgunner
Posts: 9
Joined: Wed Dec 04, 2019 5:18 am

Re: New guy from Louisiana

Post by Nomaster77 » Sat Dec 07, 2019 4:36 am

Agreed I should shootthe gun more and quit trying to make it a work of art

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest