any bad 870 years?

General discussion about Remington 870 shotgun.
Post Reply
bfskinner
Newbie
Posts: 2
Joined: Sun Aug 19, 2018 12:41 am

any bad 870 years?

Post by bfskinner » Sun Aug 19, 2018 1:08 am

I just ordered a police 870...probably from the 1960's.

This is my first shotgun of any kind. I do like the look of the older shotguns with their worn wood furniture.
Does an older 870 present any particular disadvantages? (ex: unable to accept modifications / accesories)?

User avatar
Vitaly
Owner
Posts: 1193
Joined: Tue Jan 03, 2012 11:27 am

Re: any bad 870 years?

Post by Vitaly » Sun Aug 19, 2018 7:44 pm

The older the Remington 870 the better :) you will get non-MIM extractor and aluminum trigger group. But you may need to get flexitab conversion kit.
http://www.Rem870.com - Blog about the Remington 870 Shotgun

exbcmc
Newbie
Posts: 3
Joined: Mon Aug 20, 2018 4:56 am

Re: any bad 870 years?

Post by exbcmc » Mon Aug 20, 2018 5:02 am

Hi, I’m new here, my first post. Just bought an 870, new. Can’t get the barrel nut lose...

User avatar
TexasArmor84
Senior Shotgunner
Posts: 275
Joined: Tue Dec 10, 2013 7:52 pm

Re: any bad 870 years?

Post by TexasArmor84 » Tue Aug 21, 2018 2:12 am

The barrel doesn’t have a nut do you mean the magazine nut?


Sent from my iPhone using Tapatalk Pro

efriedrich
Active Shotgunner
Posts: 95
Joined: Fri Dec 22, 2017 1:53 am

Re: any bad 870 years?

Post by efriedrich » Tue Aug 21, 2018 6:23 pm

Cover the nut with a piece of leather (old glove) and grip it with some pliers. Loosen counter clock wise.

User avatar
Synchronizor
Elite Shotgunner
Posts: 3022
Joined: Fri Dec 28, 2012 8:04 am
Location: The Inland Northwest
Contact:

Re: any bad 870 years?

Post by Synchronizor » Wed Sep 05, 2018 4:52 am

Remington's made improvements to the 870 design over the years. The one major upgradeis the flex tab fix to the action, but there have also been smaller improvements to things like the magazine follower, extractor, firing pin & spring, shell latches, and so on. Older 870s are still very good guns, and can be upgraded with these improved parts, but newer specimens will already come with them, which can save you a fair bit of work.

Also, a whole lot of older 870s were only set up for 2.75" shells, which isn't necessarily a deal-breaker (2.75" shells are sufficient for most applications), especially since non-magnum guns can be converted to cycle 3" shells without any butchery. But if you do want 3" capabilities, it's a whole lot easier to just start with a magnum model.

A mid-1980s or newer gun will have the flex-tab action and all the really significant improvements. If you go newer than that, you'll get a few more nice things like a high-visibility follower and screw-in chokes becoming pretty much standard on hunting barrels. Even newer, into the 2000s & 2010s, the guns are still good, and have all the upgrades, but you'll also get to the point where Remington really started getting into special models and model-specific features that can potentially make things difficult depending on how you intend to build & use the gun.

Accessories are pretty much all interchangeable, regardless of year. There are a few odd exceptions, but nothing that'll typically stop you from building what you want. Stocks & fore-ends are almost universally-interchangeable among 870s of the same frame size.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests